Hitachi LE40K507, Руководство пользователя

Страница: 7 / 44

7
EN
How to attach the stand
How to remove the stand
When you transport this product, remove the stand and pack flat against the back of the unit in the carton. To remove the stand,
perform the above steps in reverse order.
When you mount the TV on the wall, remove the stand. To disconnect the base/stand remove the screws from the back as below.
NOTE:
• Assure the AC cord is not connected to AC outlet.
• Before beginning this process, assure that TV is laid on a clean, safe, and cushioned space to avoid any damage to the unit.
• Do not touch or press the LCD screen, the glass might break under pressure.
1. Carefully place the TV screen face-down on a clean, cushioned surface.
2. Insert the stand neck and secure the neck with 4 screws (supplied) (M4x25) as shown in Figure 1. It will fit in only one direction.
3. Insert and Secure the stand with 4 screws (supplied) (4x16mm) as shown in Figure 2.
• Be sure to follow above instructions. Insufficient tightening or incorrect installation of the stand will not support your TV correctly, and
could result in damage or injury from tip-over.
NOTE:
• Before wall-mounting, please check carefully the location of the TV’s mounting-holes.
Figure 1
Figure 2
Screws