English
- 10 -
Switching The TV ON/OFF
To switch the TV on:
Your TV will switch on in two steps:
1-
Connect the power cord to the system. Press Power
ON/OFF
switch. Then the TV switches itself to
stand-by mode (optional).
2-
To switch on the TV from stand-by mode either:
Press a digit button on the remote control so that a
programme number is selected, or Press the "
-P/CH
"
or "
P/CH+
" button on the TV or press the
P+
or
P-
button on the remote control, so that last mode
switched off is selected.
By either method the TV will switch on.
To switch the TV off:
Press the
(stand-by) button on the remote con-
trol or On/Off switch on the TV, so the TV will switch
to stand-by mode.
To power down the TV completely, press On/Off
switch
or,
Unplug the power cord from the mains socket.
Navigating the Menu System
0(18
*8,'(
5(7851
)81&7,21
2.
)RU'LVSOD\LQJ
0HQX2SWLRQV
)RU1DYLJDWLRQ
7R&RQILUP&KRLFHV
1-
Press
to display the menu.
2-
Press
b
or
a
button to select an icon.
Press
OK
or
`
to view the menu settings.
3-
Use
b
or
a
button to highlight. Press
`
for more
options in analogue TV mode. Use
OK
in DTV mode
for viewing a submenu.
4-
Press
_
or
`
buttons to change the settings. Press
OK
to set as default.
5-
To exit the menu or return from sub-menu screen,
press
.
These explanations are available for the navigation
of the whole Menu System. To select options that are
explained in the following parts, refer to Navigating
The Menu System.
Initial Settings
When the TV is turned on for the first time, it is in the
digital mode.
Because this is the first time the TV is used, there are no
channels stored in the memory and the following message
appears on the screen.
3OHDVHHQVXUHDHULDOLVSOXJJHGLQ'R\RX
ZDQWWRVWDUWILUVWWLPHLQVWDOODWLRQ"
9iÃ
To start installation process, select
Yes,
to cancel
select
No.
To select an option
Yes
or
No,
highlight the item by
using or buttons and press the
OK
button.
The IDTV will automatically tune to the UHF transmision
channels 21 to 68 looking for digital terrestrial TV broad-
casts and displaying the names of channels found.
This process will take about five minutes. To cancel
searching, you can press the
button at any time
during the process.
0(1 8
%%&21(
%%&7:2
%%&&+2,&(
6HD)FKDQQHOV3OHDVHZDLW7KLVZLOOWDNHDIHZPLQXWHV
&DQFHOVHDUFK
$8720$7,&6($5&+
&KDQQHOV
After
Automatic Search
process is completed, the
following message asking for analogue channel search
appears on the screen. TV switches to the analogue
TV mode.
<HV
'R\RXZDQWWRVHDUFKIRU
DQDORJXHFKDQQHOV"
1R
IB-ENG-(L42VP01U A)-MB26 UK-42780W-(RRC1001-2511E)-(ECO PIP)-10059409-5013XXXX.p6528.08.2008, 10:22
10
