English
- 27 -
AC3 Audio (*for EU countries only)
In the Confi guration Menu, highlight the AC3
Audio item by pressing “ ” or “ ” buttons. Use
the “ ” or “ ” buttons to set the AC3 Audio as
On or Off.
If the channel that you are watching supports
AC3 Audio, turn this setting on.
Hard of Hearing (*for EU countries only)
Use “ ” or “ ” button to select Hard of Hearing
and then press “ ” or “ ” button to set this
setting as On or Off.
If the broadcaster enables any special signal
concerning the audio, you can set this setting
as On to receive such signals.
Favourite Mode
This function enables or disables the 5 favourite
channel list mode by pressing “ ” or “ ” buttons
and
OK
. If a favourites list exists, it will switch to
the list number selected. If there is no favourite
listing, a warning message will be displayed.
Channel List
Use “ ” or “ ” buttons to go to Channel List
option. Use “ ” or “ ” buttons to toggle Channel
List Mode. If you select “TV Only”, with the “
” or “ ” buttons, you navigate through only TV
channels. If you select “Radio Only”, with the “ ”
or “ ” buttons, you navigate through only radio
channels. If you select “Text Only”, with the “ ”
or “ ” buttons, you navigate through only text
channels. To save the recent changes and exit;
press the “
M
” button.
Scan Encrypted
Scan Encrypted Channel feature will always be
ON after performing first time installation.
When this setting is on, search process will
locate the encrypted channels as well. If it is
set as OFF manually, encrypted channels will
not be located while in automatic search or
manual search.
Use “ ” or “ ” button to select Scan Encrypted
and then press “ ” or “ ” button to set this
setting as On or Off.
Receiver Upgrade
Over Air Download (OAD)
To ensure that your TV always has the most
update information, use this setting. Please
ensure that the TV is set to standby mode. The
TV automatically powers up at 3.00 A.M. each
day and searches for any new information which
may be broadcast and will download this to
your receiver automatically. This operation will
normally take approximately 30 minutes. If you
have an important recording to be carried out
at 3.00 A.M. and you do not want to interrupt
it, disable auto OAD search by performing the
following:
• Press
“M”
button and using the “ ” or “ ”
buttons to choose Setup and press the
OK
button.
• Highlight Confi guration menu with “ ” or “ ”
keys and press
OK
.
• Use “ ” or “ ” buttons to choose “RECEIVER
UPGRADE” and press
OK
button.
• Using the“ ” or “ ” button change “Automatic
scanning” from Enabled to Disabled.
• Highlight “Scan for upgrade” menu with “
” or “ ” keys and pres OK to commence
upgrade.
• After the search progress is completed, the
message “ Completed searching for upgrade.
No new software was found” appears on the
screen if no new software is found.
• Do not forget to re enable the automatic OAD
function after you have made your recording
by repeating the above instructions but this
time selecting ENABLE.
Note: Your TV may start in First Time Installation
mode after OAD update.
Parental Control
Use “ ” or “ ” buttons to go to Parental Lock
option. Press “
OK
” button to enter the menu.
A dialog box asking for the lock key will be
displayed. The key is set to “0000” initially. Enter
PIN. If it is incorrect, “
Wrong Pin
” OSD will be
displayed. If it is correct, the Parental Control
menu will be displayed:
A01-[GB]-MB35_IDTV-PANEU_NICKEL1_32856W_1050UK_10061096_50141201.indd 27
28.01.2009 16:45:00
