background image

- 3 -

Safety Precautions

Please read the following recommended safety pre-

cautions  carefully  for  your  safety.

IMPORTANT SAFETY

INFORMATION ON OPERATING

YOUR TV

Do’s and Don’ts

DO’s

This Television has been designed and manu-

factured to meet international safety standards,

but like any electrical equipment, care must be

taken if you are to obtain the best results and

safety is to be assured.

DO 

read the operating instructions before you

attempt to use the equipment.

DO 

consult your dealer if you are in any doubt

about installation, operation or safety of your

equipment.

DO 

be careful with glass panels or doors on

equipment.
This TV is supplied with a fitted mains plug.  This

plug must not be cut off as it may contain a spe-

cial radio interference filter, the removal of which

could lead to impaired performance.  If you wish

to extend the lead, obtain an appropriate safety

approved extension lead or consult your dealer.
Observe the manufacturers instructions when

connecting extension leads to the TV.  Check the

fuse rating on the new plug, this should be fitted

with a 5 Amp fuse which conforms to either ASTA

or BSI (BS1 362) approvals, these are easily
identifiable by either the 

 or 

 symbols.  If

you are in any doubt about the installation of an

extension lead, please consult a competent

electrician.

DON’Ts

DON’T 

continue to operate the equipment if you

are in any doubt about it working normally, or if it

is damaged in any way switch off, withdraw the

mains plug and consult your dealer.

DON’T 

place water filled vessels on top of T.V.

cabinets.

DON’T 

remove any fixed cover as this may ex-

pose dangerous voltages.

DON’T 

leave equipment switched on when it is

unattended unless it is specifically stated that it

is designed for unattended operation or has a

stand-by mode.  Switch off using the switch on

the equipment and make sure your family know

how to do this.  Special arrangements may need

to be made for infirm or handicapped people.

DON’T 

use equipment such as personal stereos

or radios so that you are distracted from the re-

quirements of traffic safety.  It is illegal

 

to watch

television whilst driving.

DON’T 

obstruct the ventilation of the equipment,

for example with curtains or soft furnishings.

Overheating will cause damage and shorten the

life of the equipment.

DON’T 

use makeshift stands and NEVER fix legs

or stands to the TV with any screws other than

those provided - to ensure complete safety al-

ways use the manufacturers approved stand

with the fixings provided.

DON’T 

allow electrical equipment to be exposed

to rain or moisture.

ABOVE ALL

•  NEVER  let  anyone,  especially  children  push

anything  into  holes,  slots  or  any  other  open-

ing  in  the  case  -  this  could  result  in  a  fatal

electric  shock.

• 

NEVER  guess  or  take  chances  with  electrical

equipment of any kind - it is better to be safe

than  sorry!

6XUHO\FRQQHFW

WKHJURXQGZLUH

PE Connection to mains

Be  sure  to  ground  the  connection  properly.  Connect  the  ground  terminal

of  TV  with  the  ground  terminal  provided  at  the  power  outlet  using  the

enclosed  power  cord.  If  the  provided  plug  does  not  fit  your  outlet,  con-

sult  an  electrician  for  replacement  of  the  obsolete  outlet.

Содержание L26H01









































Отзывы: