Hitachi L26H01, Инструкция по эксплуатации

Страница: 17 / 40

- 16 -
Installation
The Installation menu mainly intends to help you for
building a Channel Table in the most efficient way.
0DLQ0HQX
This menu includes the following items:
1. Add New Channels
2. First Time Installation.
ADD NEW CHANNELS:
This tuning menu consists of two parts:
· Automatic Search
· Manual Search
Automatic Search
Automatic search is started by pressing the OK but-
ton in the auto-search pop up menu. All the services
are searched and a channel table is created auto-
matically.
All channels found are stored in a sorted form with
respect to their channel numbers. Some services
may not appear with the correct channel number. At
the time of printing, not all broadcasters are sending
their channel number information.
Manual Search
In manual search, the number of the multiplex is en-
tered manually and only that multiplex is searched for
the channels. For every valid channel number, signal
level, signal quality and network name are shown at
the bottom of the screen.
In both manual and auto search any existing channel
in the database is not re-stored to avoid redundant
duplicates of that channel.
FIRST TIME INSTALLATION
The user can use this item to load default settings,
which had been loaded to the receiver at the factory.
To install factory settings, highlight “First Time In-
stallation” menu and press the OK button, then you
will be asked to confirm for deleting all channels and
settings.
,QVWDOODWLRQ
$GG1HZ&KDQQHOV
)LUVW7LPH,QVWDOODWLRQ
By selecting YES and pressing the OK button, the
existing channel table will be deleted.
After factory settings is loaded, “
First Time Instal-
lation ” menu will be displayed.
Press the OK button to start installation. After search
is completed for digital channels, a message asking
search for analogue channels appears on the screen.
Press the OK button to search for analogue
channels.The following menu appears on the screen
for analogue channel search.
$XWR3URJUDP