- 32 -
button. (CAM set up menu is not displayed
when it is not required.)
To see the viewing contract information:
Enter IDTV; press
MENU
button, then highlight
Common Interface
and press
OK
button.
When no module is inserted,
No Common
Interface module detected
message
appears on the screen.
Refer to the module instruction manual for
details of the settings.
NOTE
: Insert or remove the CI module only
when the TV is in
STAND-BY
mode or
SWITCHED OFF
.
Navigating the Analogue TV
Menu System
)RUGLVSOD\LQJ
PHQXRSWLRQV
)RUQDYLJDWLRQ
7RFRQILUP
FKRLFHV
Press
M
to display the main menu.
Press or button to select an icon. Press
or
OK
button for more options.
Use or button to highlight.
Press or buttons to change the settings.
Press
OK
to set as default.
To exit the menu or return from sub-menu
screen, press
M
.
Note
: These explanations are valid for the
navigation of the whole menu system.
To select options that are explained in
the following parts, refer to Navigating
the Analogue TV Menu System.
00-HITACHI-ENG-01-TV-19856W-MB27 PEU IDTV-1165UK-VGA-(LIPS)-10059154-5013xxxx.p65 12.09.2008, 11:16
32
