- 20 -
button to highlight
Txt. Region.
Select a region
by using
_
or
`
button. To cancel, press the
79
'79
button.When finished, press
OK
button to continue and the following OSD will
be displayed:
$XWR3URJUDPPLQJ6\VWHP
$XWRPDWLFWXQLQJUXQVDW
6WDWH)LQHVFDQQLQJ
([LW79
After
initial aps
is finalized, a programme list
will appear on the screen. In the programme
list you will see the programme numbers and
names assigned to the programmes.
If you do not accept the locations and/or the
names of the programmes, you can change
them in Program table. For details, see the
section, Program table.
General Operation
Pressing the
TV/DTV
button at any time while
watching television programmes will switch
the TV set between the digital terrestrial
television broadcasting and the analogue
broadcasting.
Information Banner
Whenever you change the channel using the
P/CH +
or
P/CH -
buttons or the numeric
buttons, the TV displays the broadcast picture
along with an information banner at the
bottom of the screen. This will remain on the
screen for approximately three seconds.
The information banner can also be
displayed by pressing the
button at any
time while watching the TV. Pressing
button again removes the banner.
57/
&+
1RZ1(:6
1H[W
1(:6
6LJQDO
The information banner gives information
on the channel selected and the programme
on it.
The name of the channel is displayed along
with its channel list number and with an
indication of the strength of the signal
received on this tuning channel.
The current and next programme information
are given with the beginning and ending
time.
The current time information is displayed
along with channel name.
Hint:
Not all channels broadcast the
programme data. If the name and times
of the programme are not available then
No Information Available
is displayed
in the information banner.
Note
: If the selected channel is locked, you
must enter the correct four digit key to
view the channel. In such a situation, a
dialog box asking for the lock key will
be displayed:
(QWHU/RFN.H\
Electronic Programme Guide (EPG)
Some, but not all, channels send information
about the current and next events. Please note
that event information is updated automatically.
If there are no event information data available
for channels, only channel name with
No
Information Available
banner is displayed.
Press
GUIDE
button to view the
EPG
menu.
Press
a
or
b
buttons to navigate in
00-HITACHI-ENG-01-TV-19856W-MB27 PEU IDTV-1165UK-VGA-(LIPS)-10059154-5013xxxx.p65 12.09.2008, 11:16
20
