KP-M1A
- 31 -
16. Notes to users
"
Power supply
!
Connect a 12V DC voltage (11 to 13V) from an external regulated DC power supply.
!
Use a stable power supply without ripple and noise.
!
Prior to turning on the power switch , check that the polarities of the power cable are correct ,
referring to the connection diagram
"
To protect CCD (sensor)
!
Do not touch the glass surface of the CCD sensor to avoid deterioration in picture quality
due to dirt and scratches.
!
If the glass surface of the sensor should become dusty or dirty , remove dust or dirt carefully
with a cotton-tipped applicator. Do not wipe the surface with dry cloth or paper tissue to
avoid possible damage to the glass surface by static electricity.
"
Protection of camera
!
Do not use or store the camera under direct sunlight , at a place exposed to rain or snow , or
at a place where flammable or corrosive gas is present.
!
When housing the camera in a camera case , use the utmost care regarding rise of internal
temperature.
!
When casing the camera , the temperature normally rises by 10 to 20
℃
, compared with the
outside air temperature. The camera operates in the temperature range from -5 to 45
℃
.
If the camera is used or left in high temperature environment for hours , the life of the
camera may be shortened.
!
Do not drop the camera. Do not apply strong shock or vibration to the camera.
!
Before connecting or disconnecting a connector , turn off the camera and be sure to hold
connector body to connect or disconnect the connector.
"
Camera arrangement
!
Mutual interference noise can occur if multiple cameras are arranged in close proximity.
Separate the cameras to the extent possible.
!
When camera units are installed directly into other equipment , external noise can prevent a
normal picture. In such cases , shield the camera units.
!
The camera can be damaged by static electricity. Use ample care when installing and
arranging.
"
Auto electric shutter
!
In regions using 50 Hz power line frequency , flicker can appear on the monitor screen from
light sources such as fluorescent or mercury. In such cases , release the auto electronic
shutter.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
