Hitachi KP-D5010-S1, Руководство по эксплуатации

Страница: 14 / 49

Revision A June 27, 2011
14 / 49
b) Set Current Position command
It is a command that does the presetting movement to the position in which zoom/focus were
specified.
● Transmission command
● Reply command
● Parameter
● Notes
The example of the registration procedure is shown in the following.
M YH-YL
a) 80h (start) FFFFh
b) 02h Zoom position parameters
c) 03h Focus position parameters
d) 40h End FFFFh
After the end is acquired, the presetting movement is done.
The working area is as shown in the following.
Zoom 0 – 255 (WIDE <-> TELE)
FOCUS 0 – 255 (FAR <-> NEAR)
The value of the WIDE edge and the TELE edge of optical system is different in each camera.
Please confirm the value of the edge by "Call Current Position command".
M Content YH-YL Content
02h Zoom 0000h – 00FFh
03h Focus 0000h – 00FFh
80h Start FFFFh
40h End FFFFh
Command 1 Command 2 Data 1 Data 2 Data 3 Data 4
00h 39h M YH YL FFh
Command 1 Command 2 Data 1 Data 2 Data 3 Data 4
00h 39h M YH YL error