
1000 Brown Rd.
Auburn Hills, MI 48326
248.754.1900
Jrautomation.com
TPM Handheld User Manual - prelim 2
Page 7 of 17
Printed: 11/16/22 3:38 PM
The figure bellows shows the keypad, and gives some information on the special functions of the keys.
Settings Menu
The settings menu allows the operator to setup and customize the use of the handheld. To enter the
settings menu, press and hold the Enter/Settings key for 3 seconds.
There are 3 screens for the settings menu. Use the ‘down arrow’ or the ‘up arrow’ keys to move the
cursor up and down. When the cursor gets past the bottom item in the list, the second settings menu
screen will appear. Below are pictures showing the screens in the settings menu:
‘LF, RF, LR, & RR’ Initiates a
stem read and associates
those reads with the
appropriate wheel
‘Arrow’ keys allow movement
of the cursor through prompts
and selection lists. It also is
used to scroll across multiple
vehicles currently stored.
‘Clear/Esc’ is used to
clear data and to exit
out from the current
screen
‘Stem Sel’ opens the
stem select screen
‘BC Scan’ initiates
the barcode reader
‘Enter’ is used to
make selections.
Holding in this key
opens the settings
Screen page
indicator