Hitachi JR Automation Esys TPM-HH-700-000 Скачать руководство пользователя страница 5 | Manualshive

Страница: 5 / 17

Hitachi JR Automation Esys TPM-HH-700-000 Скачать руководство пользователя страница 5

1000 Brown Rd.

Auburn Hills, MI 48326

248.754.1900

Jrautomation.com

TPM Handheld User Manual - prelim 2

Page 5 of 17

Printed: 11/16/22 3:38 PM

The integrated barcode scanner can scan 1D and 2D barcodes for the vehicle identifier. Through the
option menu, the system can be setup so the barcode is forced to be scanned before TPM stems are
read.

Battery Save Feature

The handheld has a battery save feature that disables
both the display and the keypad when no movement is
detected after 10 minutes.  This maximizes the
handheld’s battery life.  If the battery save feature is
active, the display will be shut off and none of the
buttons on the keypad will work (including the power
button).  Move the handheld to re-enable the keypad
and display.

Barcode
Scanner

12Vdc

Charging Pins

Serial (RS-485)

Communication

Pins

Mounting Magnet

secures handheld when

docked in the cradle

Serial

Number

If the display does not
turn on by pressing the
power button, the

battery save feature is most likely
active. Just pick up the handheld. It
should turn on. If it still does not turn
on, then the handheld needs to be
charged by placing it in the dock.

«
...
3
4
5
6
7
...
»

Содержание JR Automation Esys TPM-HH-700-000


















Отзывы:

Нет отзывов