Hitachi Innovate CP-X2520 Скачать руководство пользователя страница 105

Страница: 105 / 115

Connecting power supply

Put the connector of the power cord into the

AC IN

(AC inlet) of the projector.

Firmly plug the power cord’s plug into the

outlet. In a couple of seconds after the

power supply connection, the

POWER

indicator

will light up in steady orange.

Please remember that when the

DIRECT POWER ON

function activated, the connection of the power supply
make the projector turn on.

Turning on the power

Make sure that the power cord is



rmly

and correctly connected to the projector

and the outlet.

Make sure that the

POWER

indicator is

steady orange. Then remove the lens cover.

Press the

STANDBY/ON

button on the

projector or the remote control.

The projection lamp will light up and the

POWER

indicator will begin blinking in green.

When the power is completely on, the indicator
will stop blinking and light in steady green.

WARNING

►

Please use extra caution when connecting the power cord, as

incorrect or faulty connections may result in



re and/or electrical shock.

• Only use the power cord that came with the projector. If it is damaged, consult

your dealer to get a new one.

• Only plug the power cord into an outlet whose voltage is matched to the power

cord. The power outlet should be close to the projector and easily accessible.
Remove the power cord for complete separation.

• Never modify the power cord.

127,&(ʇ

This product is also designed for IT power systems with a phase-to-

phase voltage of 220 to 240 V.

WARNING

►

A strong light is emitted when the projector’s power is on. Do

not look into the lens of the projector or look inside of the projector through any
of the projector’s openings.

NOTE

• Please power on the projector prior to the connected devices.

• The projector has the

DIRECT POWER ON

function, which can make the

projector automatically turn on. For more information, please see the “Operating

Guide” in the CD.

STANDBY/ON

button

POWER

indicator

VIDEO

DOC.CAMERA

KEYSTONE

ASPECT

BLANK

MUTE

MY BUTTON

POSITION

ESC

ENTER

RESET

COMPUTER

MY SOURCE/

AUTO

MAGNIFY

PAGE

VOLUME

DOWN

࡯

OFF

㧗

FREEZE

Power cord

AC IN

Содержание Innovate CP-X2520




















































































































Результаты поиска

Содержание Innovate CP-X2520

Отзывы:

Похожие инструкции для Innovate CP-X2520

Бренды по названию

Популярные бренды

Hitachi Innovate CP-X2520, Руководство пользователя и эксплуатационное руководство

Результаты поиска

Содержание Innovate CP-X2520

Отзывы:

Похожие инструкции для Innovate CP-X2520

Бренды по названию

Популярные бренды