manualshive.com logo in svg

Hitachi HUS151414VL3600, Технические характеристики

"Hitachi HUS151414VL3600" - это надежный жесткий диск высокого качества с большим объемом памяти. Для быстрой установки и настройки рекомендуется скачать бесплатное руководство пользователя с manualshive.com. Это краткое руководство поможет вам использовать устройство на полную мощность без лишних затруднений.

Поделиться
Скачать
background image

Hitachi Ultrastar 15K147 SCSI Hard Disk Drive Specification

241

gets send a Simple message immediately after the Identify message in Message In phase just after Reselection.

2.   Each initiator can issue either a tagged command or an untagged command exclusively at the same time. Other initia-

tors can exist which operate mutually exclusively with tagged or untagged commands

3.   When DQue (Disable queue) of mode page 0Ah is 1, if an initiator issues a tagged command, the drive returns “Mes-

sage Reject” message (07h) and receives that command as an untagged command.

4.   Queue Tag number does not affect the order of execution.
5.   If an initiator issues a command with a queue tag which is the same as the current I/O process or queued I/O process. 

The target returns Incorrect Initiator connection.

6.   A series of linked commands are a single I/O process and are assigned the queue tag established in the initial selection. 

A command received with a Head-of-Queue tag message shall not suspend a series of linked commands for which the 
target has begun execution.

7.   If DQue is changed to 1 while queued commands exist, all queued commands for the all initiators will be aborted. All 

future commands received from any initiator with a queue tag will be processed as untagged commands with a message 
reject message being returned immediately after the qtag is received by the target.

20.4  Command Reordering

Command reordering function is supported under tagged command queuing enabled (DQue = 0). The recorder feature reorders 
Read/Write commands in order to minimize seek time between commands. This function will improve total throughput of the 
drive.

20.5  Concurrent I/O Process

The Concurrent I/O process when multiple I/O processes are active (not queued) on the same logical unit at the same time. The 
target may start the data phase of an I/O process while another I/O process is not completed. The following I/O processes are 
allowed to execute concurrently:

•

 Unlinked and untagged Request Sense and Inquiry during execution of other commands.

•

One of the following commands can be executed while another one or the same one of the following commands is 

being executed, if those are untagged or Simple tagged commands.

-  Read(6), Read (10)

-  Write(6), Write (10)

When an I/O process ends in check Condition Status, the drive enters the Contingent Allegiance Condition and other queued I/
O processes from the same initiator will not execute until the CAC is cleared by that initiator.   See Section 20.16, "Contingent 
Allegiance Condition" on page xxx for details.

If an I/O process(P-1) encounters an error while another I/O process (P-2) is active, the drive returns check Condition to P-1.  
If P-2 is from the same initiator as P-1 the drive will suspend P-2 at the earliest convenient point and will not reconnect for 
data or status.  Depending on the setting of QErr bit in the Control mode page, P-2 will either be suspended until the CAC is 
cleared or terminated.  If the drive gets an error on P-2 before suspending the execution of P-2, it will keep the sense data sep-
arately from the sense data for P-1. The sense data for P-2 will be set after the Contingent Allegiance condition caused by P-1 
is cleared.

If P-2 is from a different initiator than P-1, then P-2 is allowed to continue executing after entering CAC for P-1, pending QErr 
is not set to terminate all processes to all initiators.  Then if an error occurs on P-2 before the CAC is cleared on P-1, the drive 
will send check condition and generate a CAC for P-2 while maintaining the CAC and sense for P-1.

20.6  Write Cache

If the WCE (Write cache enable) bit is 1, the drive returns Good Status and Task complete message and goes to Bus Free 
immediately after receiving the data of the last sector before actually writing the data onto the media.

If the drive detects an error after it returns a Good Status, the drive sets a Deferred Error (Error Code of sense data = 71h) and 
a following command will be returned with Check Condition and the Contingent allegiance condition is established. Under the 

Содержание HUS151414VL3600


































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для HUS151414VL3600

D-Link ShareCenter DNS-343 Quick Install Manual preview
ShareCenter DNS-343
Бренд: D-Link Страницы: 12
U-Line S-11354 Quick Start Manual preview
S-11354
Бренд: U-Line Страницы: 3
7-BIT Wicher CDTV User Manual preview
Wicher CDTV
Бренд: 7-BIT Страницы: 8
kincrome K8114 Manual preview
K8114
Бренд: kincrome Страницы: 2
Eminent EM4172 (Dutch) User Manual preview
EM4172
Бренд: Eminent Страницы: 112
Buffalo TeraStation WSS WS5020N6 User Manual preview
TeraStation WSS WS5020N6
Бренд: Buffalo Страницы: 115
NetApp FAS22 Series Manual preview
FAS22 Series
Бренд: NetApp Страницы: 9
Oracle FS1-2 Customer Service Manual preview
FS1-2
Бренд: Oracle Страницы: 268
Fujitsu PG-HDH61A User Manual preview
PG-HDH61A
Бренд: Fujitsu Страницы: 12
Fujitsu PG-HD6G1C User Manual preview
PG-HD6G1C
Бренд: Fujitsu Страницы: 16
Fujitsu MPG3xxxAT Product Manual preview
MPG3xxxAT
Бренд: Fujitsu Страницы: 201
Fujitsu PG-HD2E4H User Manual preview
PG-HD2E4H
Бренд: Fujitsu Страницы: 14
Fujitsu MPC3045AH Product Manual preview
MPC3045AH
Бренд: Fujitsu Страницы: 185
Fujitsu MPC3032AT Product Manual preview
MPC3032AT
Бренд: Fujitsu Страницы: 179
Fujitsu MPA3017AT Product Manual preview
MPA3017AT
Бренд: Fujitsu Страницы: 176
Fujitsu MPD3091AH Product Manual preview
MPD3091AH
Бренд: Fujitsu Страницы: 191
Fujitsu MJA2080BH Product/Maintenance Manual preview
MJA2080BH
Бренд: Fujitsu Страницы: 320
Fujitsu MPD3043AT Product Manual preview
MPD3043AT
Бренд: Fujitsu Страницы: 191

Бренды по названию

Популярные бренды

Загрузить еще бренды