manualshive.com logo in svg

Hitachi HUS151414VL3600, Технические характеристики

"Hitachi HUS151414VL3600" - это надежный жесткий диск высокого качества с большим объемом памяти. Для быстрой установки и настройки рекомендуется скачать бесплатное руководство пользователя с manualshive.com. Это краткое руководство поможет вам использовать устройство на полную мощность без лишних затруднений.

Поделиться
Скачать
background image

Hitachi Ultrastar 15K147 SCSI Hard Disk Drive Specification

149

Hitachi Confidential

 

•

Reserve

This service action does not conflict with a successfully established persistent reservation. 

If the Initiator has not previously performed a Register service action, the command with this service action is 
rejected with 

Reservation Conflict

 status. 

If the key specified in the Reservation key field is already registered but the Initiator that registered the key is differ-
ent from the Initiator requesting the command, the Target returns 

Reservation Conflict

 status. 

If persistent reservation that is being attempted conflicts with persistent reservation that is held, the Target returns a 

Reservation Conflict

 status.

The established persistent reservation applies to all commands received after the successful completion of the com-
mand.

•

Release

This service action may conflict with a successfully established persistent reservation.

If the Initiator requesting the command has not previously performed a Register service action, the command is 
rejected with a status of 

Reservation Conflict

.

If the key specified in the Reservation key field is already registered but the Initiator that registered the key is differ-
ent from the Initiator requesting the command, the drive returns a 

Reservation Conflict

 status.

The drive returns 

Good

 status when a key specified in Reservation key field is not found.

When the key is found but the scope is different from the registered scope or the type is different from the registered 
type, the command is rejected with 

Check Condition

 status. The sense key is set to 

Illegal Request

 and the additional 

sense data is set to 

Invalid Release of Active Persistent Reservation

.

•

Clear

If the indicator requesting the command has not previously performed a Register service action, the command is 
rejected with a status of Reservation Conflict. 

•

Preempt and Abort

This service action does not conflict with a successfully established persistent reservation.

If the Initiator requesting the command has not previously performed a Register service action, the command is 
rejected with a status of 

Reservation Conflict

.

If the key specified in the Reservation key field is already registered but the Initiator that registered the key is differ-
ent from the Initiator requesting the command, the drive returns a 

Reservation Conflict 

status.

Even if the key specified in the Service Action Reservation key field is not registered, the drive makes new persistent 
reservation without preempting if it does not conflict with an existing persistent reservation.

When the key is registered but reservation for the key is nothing yet and the new persistent reservation does not con-
flict with an existing persistent reservation, the drive makes new persistent reservation and clears the key and all 
commands from the Initiator that was registered the key.

When the key specified in the Service Action Reservation Key is cleared even if a reservation for the key is nothing 
yet, the drive makes UNIT ATTENTION condition for the Initiator that was registered the key. The sense key is set to 

Unit Attention

 and the additional sense data is set to 

Reservation Preempted

.

When PERSISTENT RESERVE OUT command with this service action completes successfully, the Generation 
counter is incremented.

•

Register and Ignore Existing Key

This service action does not conflict with a successfully established persistent reservation.

The key specified in the Reservation Key field is ignored, and the key specified in the Service Action Reservation 
Key field is registered as the new key, regardless of whether or not a key was already registered. 

Содержание HUS151414VL3600


































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для HUS151414VL3600

Seagate Barracuda 7200.7 ST3120025A Product Manual preview
Barracuda 7200.7 ST3120025A
Бренд: Seagate Страницы: 58
IBM TS3400 Maintenance Information preview
TS3400
Бренд: IBM Страницы: 295
Denios HazMat station EPO-2 Operation Manual And Spare Parts List preview
HazMat station EPO-2
Бренд: Denios Страницы: 6
IBM TS7650 PROTECTIER DEDUPLICATION APPLIANCE Installation Roadmap Manual preview
TS7650 PROTECTIER DEDUPLICATION APPLIANCE
Бренд: IBM Страницы: 218
Supermicro SSG-927R-E2CJB User Manual preview
SSG-927R-E2CJB
Бренд: Supermicro Страницы: 62
Eneo DMR-104 Operating Instructions Manual preview
DMR-104
Бренд: Eneo Страницы: 12
Fujitsu MAY2036RC Product/ Product/Maintenance Manual preview
MAY2036RC Product/
Бренд: Fujitsu Страницы: 94
Fujitsu MAX3036NC Maintenance Manual preview
MAX3036NC
Бренд: Fujitsu Страницы: 130
Fujitsu MBA3073FD Product Manual preview
MBA3073FD
Бренд: Fujitsu Страницы: 106
Fujitsu MBC2036RC SERIES Installation Manual preview
MBC2036RC SERIES
Бренд: Fujitsu Страницы: 1
Fujitsu MBB2073RC SERIES Product Manual preview
MBB2073RC SERIES
Бренд: Fujitsu Страницы: 98
Fujitsu MAX3036RC SERIES Product/Maintenance Manual preview
MAX3036RC SERIES
Бренд: Fujitsu Страницы: 94
Fujitsu MAX3036FC Product/Maintenance Manual preview
MAX3036FC
Бренд: Fujitsu Страницы: 112
Fujitsu MHA2021AT Product Manual preview
MHA2021AT
Бренд: Fujitsu Страницы: 177
Fujitsu MHG2102AT - Mobile 10 GB Hard Drive Product Manual preview
MHG2102AT - Mobile 10 GB Hard Drive
Бренд: Fujitsu Страницы: 223
Fujitsu MHJ2181AT Product Manual preview
MHJ2181AT
Бренд: Fujitsu Страницы: 227
Fujitsu MHC2032AT Product Manual preview
MHC2032AT
Бренд: Fujitsu Страницы: 219
Fujitsu MHN2100AT - Mobile 10 GB Hard Drive Product Manual preview
MHN2100AT - Mobile 10 GB Hard Drive
Бренд: Fujitsu Страницы: 236

Бренды по названию

Популярные бренды

Загрузить еще бренды