Hitachi HTS548020M9AT00 Скачать руководство пользователя страница 4 | Manualshive

Страница: 4 / 213

Hitachi HTS548020M9AT00 Скачать руководство пользователя страница 4

1st Edition (Revision 0.1)  S13G-1056-01 (15 April 2003) Preliminary
2nd Edition (Revision 0.2)  S13G-1056-02 (05 June 2003) Revision
3rd Edition (Revision 0.3) S13G-1056-03 (10 June 2003) Revision
4th Edition (Revision 0.4)  S13G-1056-04 (12 June 2003) Revision
5th Edition (Revision 1.0)  S13G-1056-10 (16 June 2003) Revision
6th Edition (Revision 1.1)  S13G-1056-11 (02 September 2003) Revision
7th Edition (Revision 2.0) S13G-1056-20 (19 September 2003) Revision
8th Edition (Revision 2.1) S13G-1056-21 (17 November 2003) Final
The following paragraph does not apply to the United Kingdom or any country where such provisions are
inconsistent with local law: HITACHI GLOBAL STORAGE TECHNOLOGIES PROVIDES THIS PUBLI-
CATION "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY OR
FITNESS FOR A PARTICULAR PURPOSE. Some states do not allow disclaimer or express or implied
warranties in certain transactions, therefore, this statement may not apply to you.

This publication could include technical inaccuracies or typographical errors. Changes are periodically made to the
information herein; these changes will be incorporated in new editions of the publication. Hitachi may make
improvements or changes in any products or programs described in this publication at any time.

It is possible that this publication may contain reference to, or information about, Hitachi products (machines and
programs), programming, or services that are not announced in your country. Such references or information must
not be construed to mean that Hitachi intends to announce such Hitachi products, programming, or services in your
country.

Technical information about this product is available by contacting your local Hitachi Global Storage Technologies
representative or on the Internet at

http://www.hgst.com

Hitachi Global Storage Technologies may have patents or pending patent applications covering subject matter in
this document. The furnishing of this document does not give you any license to these patents.

©Copyright Hitachi Globlal Storage Technologies

Note to U.S. Government Users —Documentation related to restricted rights —Use, duplication or disclosure is
subject to restrictions set forth in GSA ADP Schedule Contract with Hitachi Global Storage Technologies.

«
...
2
3
4
5
6
...
»

Содержание HTS548020M9AT00






















































































































































































































Отзывы:

Нет отзывов