Prepar
ation
Installing the LCD
TV
Using The
F
eatures
T
roub
leshooting
Specifications
Using
The DTV F
eatures
Introducing the LCD
TV
14
PC AUDIO IN
AC IN 100-240V
50/60Hz
AC POWER
SWITCH
VHF/UHF IN
Connecting a TV Cable or an Antenna
Refer to the owner’s manual of the external equipment to be connected. When connecting external
equipment, do not connect any AC power cords to wall outlets until you have completed all the
connections.
Basic Connection: Connecting an aerial
Connect your existing TV aerial to the Aerial input socket on the TV.
The Aerial input socket can be connected with the ATV / DTV Aerial.
Connect all AC power sources before turning on the power switch at the back of the TV.
Press the
STANDBY
button on your remote to turn on your LCD TV.
a. After connecting an aerial to your LCD TV and connecting the mains cable to the
TV and mains socket, turn the POWER SWITCH of rear TV on, a red light will show
on the front panel of the TV.
b. Press the
STANDBY
button, the red light will change to green and the First Time
Installation screen will show:
1. Make sure an aerial is fitted then press
OK
button on the remote to start the Auto
Programme Scan ( APS ).
2. In a short while you will see the TV programmes briefly as each channel is received and
stored in the memory. When APS is completed, BBC1 will show, press
CH.
Ÿź
buttons
to view the other channels stored.
c. To power off press the
STANDBY
button, the green light will change to red.
Press the
INPUT
button and choose TV or DTV mode then press
OK
to select.
Insert the supplied mains cable to the mains socket located on the rear of the TV.
Connect the other end of this cable to a 3-pin mains socket.
TV Aerial
Aerial/75-ohm coaxial input
Connects the supplied
mains cable to this socket.
Make sure the power switch
is switched off
Unplug from a
wall outlet
n
o
p
q
5
If you encounter problems receiving digital signals this may be due to having an inadequate aerial (you may
have an old “Analogue” aerial). A replacement “Digital” aerial will be required, contact your local aerial
installer for further information.
