EN-75
S
e
tup 2 M
e
nu
1. Slide the mode switch to [
].
2. Press the
MENU
button, and select the [Setup2] menu with the
button.
The [Setup2] menu is displayed.
3. Select the desired [Setup2] option item with the
/
buttons,
and press the
SET
button to enter its respective menu.
4. Select the desired setting with the
/
buttons, and press the
SET
button.
5. To exit from the menu, press the
MENU
button.
Auto OFF
If no operation is performed for a specific period of time, the power to the camera is automatically turned
off. This feature is useful to reduce battery wear.
* 1 Min. / 3 Min. / 5 Min.
Date/Time
Refer to section in this manual titled “Setting the Date and Time” for further details.
Sys. Reset
This returns all basic settings to the camera’s default settings. The time setting will not be reset.
* Cancel / Execute
Language
Refer to section in this manual titled “Choosing the Display Language” for further details.
Video Output
This sets video output system of the video equipment that you are going to connect to the camera.
* NTSC / PAL
System Info.
This displays the firmware version of the camera.