EN-22
Using an AC Pow
e
r Adapt
e
r
Using an AC power adapter prevents the camera from automatically powered off while transferring files
to your computer.
Perform the steps in the preceding section “Charging the Battery”.
Make sure to use only the AC power adapter specified for the digital camera. Damage caused by
the use of an incorrect adapter is not covered under the warranty.
Ins
e
rting and R
e
moving an SD M
e
mory Card (Optional Acc
e
ssory)
The digital camera comes with approx. 32 MB of internal memory (26 MB available for image storage),
allowing you to store captured still images or video clips in the digital camera. However, you can also
expand the memory capacity by using an optional SD memory card so that you can store more files.
Ins
e
rting an SD m
e
mory card
1. Open the battery / SD memory card cover.
2. Insert the SD memory card in the correct orientation shown.
Hold the SD memory card with its front side (printed arrow)
facing the rear side of the camera, and then insert the card as
far as it can go.
3. Close the battery / SD memory card cover.
R
e
moving an SD m
e
mory card
Open the battery / SD memory card cover, press lightly on the edge of the SD memory card and it will eject.
To prevent valuable data from being accidentally erased from an SD
memory card you can slide the write-protected tab (on the side of the
SD memory card) to “LOCK”.
However, to save, edit or erase data on an SD memory card, you must
unlock the card.
Be sure to format an SD memory card with this digital camera before using it. Refer to section in
this manual titled “Formatting an SD Memory Card or Internal Memory” for further details.
To prevent the damage of an SD memory card, please turn off the power when inserting or
removing the SD memory card. If inserting or removing the SD memory card with power on, the
camera turns off automatically.
