Hitachi HC-A64MB, Инструкция по установке и эксплуатации

Страница: 16 / 128

Operation
Offset (1) Name Description Values Read/Write
22 OPER_CONDITION Unit operation condition
0: OFF
1: Thermo OFF
2: Thermo ON
3: Alarm
Read
23 (Not used) (Not used) (Not used) (Not used)
24
AMBIENT TEMPERA-
TURE
Ambient temperature (2) -63ºC ~ 63ºC Read
25 RCS_TEM
Remote control switch temperature
(only when available in the unit) (2)
-63ºC ~ 63ºC Read
26 RCS_CONFIG Remote control switch configuration
b0: 0 Master/1Slave
b1: 0 wih RCS/1 Without RCS
Read/Write
27 RCS_GROUP Remote control switch group
0: No group
1~255
Read/Write
28~30 (Not used) (Not used) (Not used) (Not used)
31 REM_TEM Remote sensor temperature (2) -63ºC ~ 63ºC Read
N O T E
• (1) Register address is calculated as: “N + (Address * 32) + Offset” where:
• N: Data table position is 2000, position 20000 is also available to maintain compatibility with old Modbus gateway.
• Address: Indoor unit address as configured by configuration software.
• (2) These numbers refer to signed 16-bit value using 2-complement format for negative values
• (3) Bit 0 (ON/OFF) and Bit 4 (Louver) selectable only when all centrals are actived.
• In order to full lock setting from RCS (Central shown in RCS) set this register to 31.
10 PMML0351A rev.1 - 10/2015