Hitachi H 65SD2, Технические данные и руководство по обслуживанию

Страница: 25 / 26

OPTIONAL ACCESSORIES
ITEM
NO.
CODE NO. DESCRIPTION REMARKS
NO.
USED
* ALTERNATIVE PARTS
--- 4 --- 5 -- 05
PARTS
ITEM
NO.
CODE NO.
DESCRIPTION REMARKS
NO.
USED
H 65SD2
STANDARD ACCESSORIES
ITEM
NO.
CODE NO. DESCRIPTION REMARKS
NO.
USED
Printed in Japan
(050510N)
* 98 930-804 TERMINAL M4.0 (10 PCS.) 1 FOR CORD
* 99 981-974 INTERNAL WIRE 1 EXCEPT FOR GBR, USA, CAN
* 99 306-681 INTERNAL WIRE 1 FOR GBR
100 306-143 SWITCH (B) (1P SCREW TYPE) W/LOCK 1
101 323-742 SUPPORT 1
102 322-142 NYLOCK BOLT (W/FLANGE) M5X12 4
* 103 500-390Z CORD 1 (CORD ARMOR D10.7)
* 103 500-453Z CORD 1 (CORD ARMOR D10.7) FOR USA, CAN
* 103 500-391Z CORD 1 (CORD ARMOR D10.7) FOR SUI
* 103 500-466Z CORD 1 (CORD ARMOR D10.7) FOR GBR (110V)
* 103 500-450Z CORD 1 (CORD ARMOR D10.7) FOR GBR (230V)
104 940-778 CORD ARMOR D10.7 1
* 105 981-373 TUBE (D) 2 FOR CORD
501 872-422 HEX. BAR WRENCH 6MM 1
502 943-277 HEX. BAR WRENCH 3MM 1
503 314-179 CASE (STEEL) 1
601 985-231 COLD CHISEL 520MM (HEX. SHANK TYPE) 1
602 985-232 CUTTER W75X520MM (HEX. SHANK TYPE) 1
603 985-233 SCOOP 546L (HEX. SHANK TYPE) 1
604 996-372 BULL POINT 410MM (HEX. SHANK TYPE) 1
605 996-373 COLD CHISEL 410MM (HEX. SHANK TYPE) 1
606 996-374 CUTTER W75X410MM (HEX. SHANK TYPE) 1
607 980-927
GREASE FOR HAMMER. HAMMER DRILL (500G)
1
608 981-840
GREASE (A) FOR HAMMER. HAMMER DRILL (30G)
1
609 308-471
GREASE FOR HAMMER. HAMMER DRILL (70G)
1