Hitachi H 65SD2, Технические данные и руководство по обслуживанию

Страница: 14 / 26

--- 11 ---
8-3. Tool Retainer
Three types of shank tools (Fig. 1) can be mounted to
the Model H 65SD2 by turning the saddle-shaped
retainer.
(1) Mounting air tool shank tool and standard hex.
shank tool
Raise the retainer in A direction and insert the tool
shank into the hexagonal hole of the front cover as
far as it will go (Fig. 9). Put the retainer back in
position to fix the tool shank (Fig. 10).
(2) Mounting standard hex. shank tool and retaining
groove tool without collar
Lower the retainer in B direction and insert the tool
shank into the hexagonal hole of the front cover as
far as it will go facing the recessed portion of the
tool shank to the retainer (Fig. 11). Turn the retainer
in C direction to fix the tool shank (Fig. 12).
Retainer
Front cover
Fig. 9
Fig. 10
Tool shank
Fig. 11 Fig. 12
Tool shank Front cover
Retainer
Recessed portion
A
C
B