English
24
Contact a licensed electrician to make appropriate repairs.
If such a faulty receptacle is used, it may cause overheating, resulting in a serious hazard.
5. Con
fi
rming condition of the environment
Con
fi
rm that the work site is placed under appropriate conditions conforming to prescribed
precautions.
6. How to install tool
CAUTION
For tools such as a bull point, use only Hitachi genuine parts.
(1) Clean the shank portion of the tool.
(2) To attach the tool (SDS max shank), insert it into the hole
until it contacts the innermost end of the hole as illustrated
in
Fig. 1
.
If you continue to turn the tool with slight pressure, you
can feel a spot where there is a hitch. At that spot, pull the
grip to the direction of an arrow mark and insert the tool all
the way until it hits the innermost end.
Releasing the grip reverts the grip and secures the tool in
place.
(3) Pull the tool to make sure it is locked completely.
(4) To remove the tool, fully pull the grip in the direction of the
arrow and pull out the tool.
7. Deciding Working Position of Tool
The tool can be turned every 30 degrees and can be
fi
xed
at the position of 12 steps.
(1) The blade angle can be freely changed if the of the
selector lever is aligned with the of the crank cover, as
illustrated in
Fig. 2
.
(2) Turn the grip or the tool as illustrated in
Fig. 3
and
fi
x the
tool to the desired working direction.
(3) As shown in
Fig. 4
switch the selector lever to “hammering ”,
and make sure that it is locked completely.
NOTE
Turn the selector lever to check if it is completely locked and make sure that it does not
turn.
Grip
Tool
Tool shank
Fig. 1
Fig. 2
△
Grip
Fig. 3
Fig. 4
Selector lever
Selector lever
000Book̲H60MEY̲ChS.indb 24
000Book̲H60MEY̲ChS.indb 24
2017/04/17 14:25:47
2017/04/17 14:25:47