English
23
OPTIONAL ACCESSORIES (sold separately)
○
Demolishing
○
Asphalt
Cutting
(1) Bull Point
Overall Length: 280, 400 mm
(1) Cutter
○
Surface
Roughing
○
Tamping
(1) Bushing Tool
(2) Shank
(1) Rammer
(2) Shank
○
Groove digging and edging
○
Scooping
Work
(1) Cold chisel
Overall length: 280, 400 mm (1)
Scoop
○
Hammer Grease A
500 g (in a can)
70 g (in a tube)
30 g (in a tube)
APPLICATIONS
Breaking concrete, chipping o
ff
concrete, grooving, bar cutting, and driving piles.
Application examples:
Installation of piping and wiring, sanitary facility installation, machinery installation, water supply
and drainage work, interior jobs, harbor facilities and other civil engineering work.
PRIOR TO OPERATION
1. Power
source
Ensure that the power source to be utilized conforms to the power requirements speci
fi
ed
on the product nameplate.
2. Power
switch
Ensure that the power switch is in the OFF position. If the plug is connected to a receptacle
while the power switch is in the ON position, the power tool will start operating immediately,
which could cause a serious accident.
3. Extension
cord
When the work area is removed from the power source, use an extension cord of su
ffi
cient
thickness and rated capacity. The extension cord should be kept as short as practicable.
4. Check the receptacle
If the receptacle only loosely accepts the plug, the receptacle must be repaired.
000Book̲H60MEY̲ChS.indb 23
000Book̲H60MEY̲ChS.indb 23
2017/04/17 14:25:47
2017/04/17 14:25:47