Hitachi H 30PV, Технические данные и руководство по обслуживанию

Страница: 14 / 25

--- 11 ---
9. REPAIR GUIDE
9-1. Precautions and Suggestions for Disassembly and Reassembly of Main Body
The numbers in [Bold] below correspond to the item numbers in the Parts List and exploded assembly diagrams.
9-1-1. Disassembly
Retainer disassembly
Remove the Front Cap [1] (since the Front Cap is made of rubber, grasp its outer face and strongly pull it to
remove). This allows Grip (A) [2] to be separated from the Retainer Sleeve [12]. (Fig. 11)
When the Retaining Ring D40 [3] is removed by means of the snap ring remover, Grip (B) [4], Ball Spring (A)
[5], Steel Ball D7.0 [9] (3 pcs.), Ball Holder [7], Ball Spring (B) [6] and Grip (C) [8] can be removed from the
Front Cover [10]. (Fig. 12)
Fig. 11
Front Cap
Fig. 12
Grip (A)
Grip (B) Ball Spring (A)
Ball Holder
Front Cover
Steel Ball
(3 pcs.)
Retaining Ring
Grip (C) Ball Spring (B)