Hitachi H 30PV, Технические данные и руководство по обслуживанию

Страница: 13 / 25

--- 10 ---
8-4. Tool Retainer
The Model H 30PV adopts the single-step tool retainer. Clean the shank portion of tool. (Fig. 5)
Adjust the groove position by turning the tool and push it in direction until it latches itself. (Fig. 6)
Check the latching by pulling on the tool. When removing the tool, pull Front Cap in direction (Fig. 7), and pull
out the tool (Fig. 8).
Fig. 8
Fig. 7
B
Front cap
Front cap Tool shank
Fig. 5 Fig. 6
8-5. Adjusting Mechanism for Tool Swivel Angle
The tool can be turned every 30 degrees and can be fixed at the position of 12 steps. Grip (B) is turned 60
degrees in direction (Fig. 9), the tool swivel angle can be changed freely to any desired position. (Fig. 10)
It is locked completely by returning Grip (B) back to the original position.
Fig. 10
Fig. 9
(Note) Initially, grip (B) may not turn smoothly.
A
B
A
Grip (B)