Hitachi GR4000-160E1, Быстрый старт

Страница: 59 / 85

GS4000 Quick Start Guide, Revision 3
QSGGS4KX10-00 5794092-2X
41
(2) Input configuration information.
Set a device name, VLAN and an IP address of VLAN in configuration information.
Input a device name and VLAN information according to the following procedures.
( config )# system name GS1
…
Input a device name.
!GS1( config )# vlan 100
…
Define VLAN ID 100. (Allocate the VLAN ID 100 to VLAN100
in Figure 5-1.)
Specify NIF No.
Specify the port No.
[vlan 100]
!GS1( config )# untagged-port 0/0-1
…
Allocate the interface ports 0/0 and 0/1 to VLAN100 as
untagged ports.
[vlan 100]
!GS1( config )# tagged-port 0/4
…
Allocate the interface port 0/4 to VLAN100 as a tagged
port.
[vlan 100]
!GS1( config )# exit
!GS1( config )# vlan 200
…
Define VLAN ID 200. (Allocate the VLAN ID 200 to
VLAN200 in Figure 5-1.)
[vlan 200]
!GS1( config )# untagged-port 0/2-3
…
Allocate the interface ports 0/2 and 0/3 to
VLAN200 as untagged ports.
[vlan 200]
!GS1( config )# tagged-port 0/4
…
Allocate the interface port 0/4 to VLAN200 as a
tagged port.
[vlan 200]
!GS1( config )# exit
!GS1( config )#
NOTE The mark “!” will be shown at the beginning of a prompt if you change configuration information.
However, you can delete this mark by saving configuration information you changed.
NOTE A device name you input will be shown at the beginning of a prompt.
Case 1: Information setting in the configuration given in