Hitachi GR4000-160E1, Быстрый старт

Страница: 21 / 85

GS4000 Quick Start Guide, Revision 3
QSGGS4KX10-00 5794092-2X
3
As shown in Figure 1-2 below, you can divide a network into VLAN100 and VLAN200, and layer 2 communications in each of
these VLAN groups are possible. Note that the configuration information for VLAN must be set when using more than one VLANs.
Figure 1-2 Case where more than one VLANs are set
As shown in Figure 1-3 below, you can divide a network into VLAN100, VLAN200 and VLAN300, and bilateral
communications among these VLAN groups are possible. Note that the configuration information including an IP
address for each VLAN must be set to enable bilateral communications among more than one VLAN groups.
Figure 1-3 Bilateral communications among more than one VLAN groups
（
layer 3 communication
）
Working GS4000 as a layer 2 or layer 3 switch by setting an IP address for
VLAN200（layer 2 switch communication）
VLAN100（layre 2 switch communication）
GS4000
Peer switch
Working GS4000 as a layer 2 switch using more tnan one VLANs
VLAN300
（
layer 2 communication
）
VLAN200
VLAN100
(layer 2 communication
）
GS4000 Peer switch
（
layer 3 communication
）