Hitachi Gigabit Router GR2000 Series Enhanced Version Configuration Commands, Vol. 2
4-38
GR2K-GA-0014
Ver. 07-02
4.7.5
Line Information (WAN OC-POS)
Input Format
[set]
default
[ -oc3pos_clock { external | independent } ]
[ -oc3pos_crc { 16 | 32 } ]
[ { -oc3pos_scramble | -oc3pos_scramble_off } ]
[ -oc3pos_sonet_overhead <Pattern> ]
[ -oc12pos_clock { external | independent } ]
[ -oc12pos_crc { 16 | 32 } ]
[ { -oc12pos_scramble | -oc12pos_scramble_off } ]
[ -oc12pos_sonet_overhead <Pattern> ]
[ -oc48pos_clock { external | independent } ]
[ -oc48pos_crc { 16 | 32 } ]
[ {-oc48pos_scramble | -oc48pos_scramble_off } ]
[ -oc48pos_sonet_overhead <Pattern> ]
[ -oc48pos_mode { sdh | sonet | japanese_local } ]
[ { -oc48pos_aps | -oc48pos_aps_off } ]
[ -oc48pos_wait_to_restore_time <Time> ]
[ -oc48pos_aps_protocol { bellcore_1 | jt_g783_annex_b } ]
[ { -oc48pos_unidirectional | -oc48pos_bidirectional } ]
[ { -oc48pos_revertive | -oc48pos_non_revertive } ]
[ -oc48pos_sd_ber <ErrorRate> ]
[ -oc48pos_sf_ber <ErrorRate> ]
Parameters
The initial value items that can be set using line Information (WAN OC-POS) and the
initial values during initial installation are shown in Table 4-5. For details of each
parameter, refer to the configuration definition information in "line (line Information)
Serial/OC-3c(POS)/ OC-12c(POS)/ OC-48(POS)/ BRI(leased line)/ PRI(leased line)/
J2/ BRI (ISDN)/ PRI (ISDN)/ T1 (leased line)/ E1 (leased line)/ T3 non-multiplex
(leased line)/ E3 non-multiplex (leased line)/ E3 multiplex (leased line)".".
