Hitachi G10SR, Инструкция по эксплуатации и правила безопасности

Страница: 7 / 48

English
7
IMPORTANT SAFETY INSTRUCTIONS
FOR USE OF THE DISC GRINDER
WARNING:
Death or serious bodily injury could result from improper or unsafe use
of the disc grinder. To avoid these risks, follow these basic safety
instructions:
1. NEVER operate the disc grinder without its wheel guard in place.
2. NEVER place hands or body parts near the disc during operation.
3. NEVER use a depressed center wheel which is cracked or deformed or worn away.
4. NEVER use a depressed center wheel with an RPM rating which is less than 13700 RPM
for G10SR and 13300 RPM for G12SR. The wheel can disintegrate during use and cause
severe injuries.
5. NEVER use the grinder in places where the sparks generated by the grinder can cause
explosion, such as where flammable materials or gases are present.
6. NEVER push in the lock pin while the spindle is running.
7. ALWAYS wear eye protection that meets the requirement of the latest revision of ANSI
Standard Z87.1.
8. ALWAYS wear a mank or respirator to protect yourself from dust or potentially harmful
particles generated during the grinding operation.
9. ALWAYS firmly grip the body handle and side handle while operating the grinder.
10. ALWAYS have a trial run before grinding commence.
11. ALWAYS follow the instructions contained in this manual when replacing the depressed
center wheel.
REPLACEMENT PARTS
When servicing use only identical replacement parts.
Repairs should be conducted only by a Hitachi authorized service center.
POLARIZED PLUGS
To reduce the risk of electrick shock, this equipment has a polarized plug (one blade is wider
than the other).
This plug will fit in a polarized outlet only one way.
If the plug does not fit fully in the outlet, reverse the plug.
If it still does not fit, contact a qualified electrician to install the proper outlet.
Do not change the plug in any way.