background image

PRODUCT NAME

Hitachi 14.4 V Cordless Disc Grinder

Model  

G 14DSL

• Deburring and finishing ferrous, bronze and aluminum castings, grinding and scraping rust off welded and

fused parts

• Grinding, scraping rust and removing old paint from base surfaces before painting
• Cutting, grooving and grinding mild steel, tile, stone and concrete materials

[ NEW FEATURES ]

      Highest actual torque in the class

      Smallest body with shortest perimeter of the

   one-hand grip

     

Lightest weight in the class

   Soft grip handle

 

    Remaining battery indicator (switch panel)

      Safety circuit against setting the battery

      while the slide switch is turned on

      Equipped with lightweight and high-capacity

   slide-type lithium-ion battery

   Blow-molded case

MARKETING OBJECTIVE   

•••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••

LIST No. H806
Mar. 2008

The new Model G 14DSL cordless disc grinder is equipped with a slide-type lithium-ion battery.
The key features of this new cordless disc grinder are as follows:
(1) Highest actual torque in the class: 1.06 N·m
(2) Smallest body in the class with shortest perimeter of the one-hand grip
(3) Lightest weight in the class: 1.7 kg (3.7 lbs)
(4) Soft grip handle
(5) Remaining battery indicator (switch panel)
(6) Safety circuit against setting the battery while the slide switch is turned on
(7) Equipped with lightweight and high-capacity (3.0 Ah) slide-type lithium-ion battery
(8) Blow-molded case
We aim to expand our market share and increase our sales with the introduction of this new cordless disc
grinder.

MARKETING OBJECTIVE

APPLICATIONS

SELLING POINTS

International Sales Division

SPECIFICATIONS AND PARTS ARE SUBJECT TO CHANGE FOR IMPROVEMENT.

G

Содержание G 14DSL






















Отзывы: