-2-
Soft-grip handle
The grip is entirely covered with the soft elastomer to make it comfortable and slip-resistant against sweat,
oil and dust for fatigue-free and convenient operation.
Remaining battery indicator (switch panel)
The Model G 14DSL is equipped with the remaining battery indicator (switch panel). The battery remaining
power can be easily checked while the Model G 14DSL is stopping and the battery can be charged in
proper timing.
Safety circuit against setting the battery while the slide switch is
turned on
The Model G 14DSL is equipped with the safety circuit to protect the operator from the risk of sudden start
of operation when the battery is set while the slide switch is turned on. If the safety circuit activates, turn off
the slide switch and then turn on again to start operation.
Equipped with lightweight and high-capacity (3.0 Ah) slide-type
lithium-ion battery
The type BSL 1430 lithium-ion battery is equipped with the overdischarge protection circuit, overcurrent
protection circuit, and voltage monitoring circuit for each cell to prevent shortening of the battery life due to
overdischarge (overuse) or overcharge (excessive charging) of the battery.
The number of charging/discharging is about 1,500.
Precautions for use of the Type BSL 1430 lithium-ion battery
The type BSL 1430 lithium-ion battery is equipped with a protective function that automatically stops output
to extend the battery life. The motor may stop automatically in either of the following case
1
or
2
even if
the switch is depressed continuously during operation. This is because the protective function is activated.
The battery is not faulty.
1
The motor automatically stops when the remaining battery level is low (when the battery voltage is
decreased to about 8 V. Charge the battery immediately in such case.
2
The motor may stop if the Model G 14DSL is overloaded. In such case, release the switch and
eliminate the cause of the overload problem. Then the Model G 14DSL will be operable.
Please instruct the customers on the above precautions.
Blow-molded case
The blow-molded case is convenient for carrying the tool. A spare battery can also be stored in the case
(except the NN specification).
3-level indication
The battery remaining power is enough
(about 60% or higher).
The battery remaining power is a half.
The battery remaining power is nearly empty
(about 30% or lower).
