2
Before using the product, please read these warnings and cautions on safety and operation
carefully for proper use and to prevent any injury to yourself or others.
Warning:
1)
Do not modify product. Repair or disassembly must be carried out by an authorized repair
person(s) only.
2)
When cleaning, plug must be removed from outlet. Do not handle plug with wet hands.
3)
Do not get product wet.
4)
When assembling or disassembling, do not insert plug into outlet.
5)
Do not use product if cord or plug is damaged or if plug is not inserted well.
6)
Do not damage, modify, forcibly bend, pull hard, twist or bind cord. Do not place heavy
objects on cord or pinch cord.
7)
Use AC 220-240 only.
8)
Clean dirt and dust on plug regularly.
9) This product is not intended for use by persons (including children) with reduced physical,
sensory of mental capabilities, or lack of experience and knowledge, unless they have
been given supervision or instruction concerning use of the product by a person
responsible for their safety.
10) Children should be supervised to ensure that they do not play with the product.
Caution:
1) When unplugging product from outlet, make sure to pull out plug. Do not unplug by cord.
2) Stop using product immediately if unusual vibrations occur.
3) Make sure to unplug product when not in use.
4) Do not get hair close to front and back guard.
5) Never put your finger(s) into front and back guard or moving part.
6) Do not use product near any gas equipment, in the presence of flammable gas, or in rain or
water.
7) Do not use product where oil or dust or solvent may stick.
8) Do not expose body to fan wind for a long time.
9) Do not use product near any obstructions or on unstable surfaces.
Note:
If cord and/or plug are damaged, it must be replaced by a qualified technician or service agent.
1) Make sure to place product on flat surface.
2) Do not cover front and back guard.
3) Do not expose product to direct sunlight for a long time.
4) Do not spray insecticides on product.
5) Do not forcibly oscillate fan/motor section.
6) Do not cover the sensor of remote control.
7) Do not use product where oil, dust or solvent may stick.
8) Do not use product under high temperature, high humidity, rain, water spray, or near fire.
9) Do not drag product on the floor.
10) Be careful in handling the remote control. Do not drop or expose the remote control to
physical impact. Do not wet the remote control or place it on wet objects.
11) Do not use product near infants. Do not leave remote control and battery near infants.
12) After waxing floor, make sure wax is dried thoroughly then place product on the floor.
Safety Precautions
Operation Precautions
