Voltage selector switch
The power supply in the SVP3 has a manual voltage selector switch that must be set to
either 115V or 230V (default - 230V). To prevent any damage to the power supply, you
must set the voltage selector switch to the correct voltage for your system environment.
Caution: The manual voltage selector switch must set to the correct voltage
before installing the rail kit to the SVP3.
The SVP3 has a tamper-proof label covering the voltage selector switch which is set to
the default 230V setting. If this label has been removed, you must confirm the switch
setting before installing the rail kit.
Hardware specification
Voltage selector switch
Chapter 2: Hardware description
Service Processor 3 (SVP3) Technical Reference
12
