En
g
lish
52
Manually Focusing Subject
The DVD video camera/recorder usually focuses on a subject automatically (autofocus). You can also
manually focus a subject depending on the recording conditions.
FOCUSING DURING RECORDING
Normally, the DVD video camera/recorder automatically focuses the subject (autofocus), but you
can also manually focus a subject, depending on the recording conditions (manual focus).
Focusing range:
You can switch the display mode of on-screen information:
•
On T (tele) side: approximately 1 m from lens surface to infinity
•
On W (wide) side: approximately 2 cm from lens surface to infinity
1
Press the FOCUS button during recording.
Manual Focus icon will appear on the screen.
2
Press the zoom lever to “T” control side to
zoom in on subject.
3
Use the
0
/
/
buttons to adjust the focus,
while viewing the image in the viewfinder or
on the LCD screen.
Note
:
•
Pressin
g
FOCUS will alternate between manual focus
and auto focus. With auto focus, no indication will
appear on the screen.
•
Be sure to zoom in on your subject before manually
focusin
g
on it. If you brin
g
the subject into focus at the
“W” control side, focus will be faulty when you turn the
zoom lever to the “T” control side to zoom in on the
subject.
•
Manual focus is released when the DVD video
camera/recorder is turned off. When you turn the DVD
video camera/recorder on next time, auto focus will be
restored.
HDD
HDD
3 0 MIN
0 0 : 0 0 : 0 0
REM
FINE
8 : 0 0
1 / 3 / 2 0 0 7
Manual Focus icon
Adjust with
0
/
/
buttons
