background image

PRODUCT NAME

 

18 V Cordless Impact Driver Drill

*1

 

Models

   

DV 18DD, DV 18DDX

*2

 

 

*1: “Cordless Combi Drill” for Europe 
*2: Designed for operating in UK only

 

REPAIR GUIDE ----------------------------------------------------------------------------------------------------------------- 1 

1. Precautions on disassembly and reassembly   ------------------------------------------------------------ 1 

• Disassembly ---------------------------------------------------------------------------------------------------- 1 
• Reassembly ---------------------------------------------------------------------------------------------------- 2 
• Checking after reassembly --------------------------------------------------------------------------------- 5 
• Tightening torque ---------------------------------------------------------------------------------------------- 5 
• No-load current ------------------------------------------------------------------------------------------------ 5 
• Wiring diagram------------------------------------------------------------------------------------------------- 6 

2. Precautions on disassembly and reassembly of the charger  ----------------------------------------- 6 

CONTENTS 

Page 

Power Tools Service Manual 

CONFIDENTIAL 

Jul. 2020 

Overseas Sales Management Dept.

 

DV 18DD 

Та

ше

в

-

Га

лв

ин

г

 

ОО

Д

 

www.tashev-galving.com

Содержание DV 18DD










Отзывы: