Hitachi DS65MU01, Руководство пользователя

Страница: 45 / 59

DS65MU01
38
Logo
Choose to enable or disable the picture of Logo
when turn on your display.
The options are:
• {Off}
• {On} (Default)
• {User}
1. If Logo set to ON, both scalar OTS logo and
android animation OTS logo will show.
2. If Log set to OFF, neither scalar OTS logo nor
android animation logo will not show.
3. If Logo set to USER, custom logo option in
android is not set, then there will be no boot
logo when power on.
4. If Logo set to USER, custom logo option in
android is set, there will be only custom logo
when power up.
* Logo will NOT rotate with rotation setting/
detection.
Monitor ID
Set the ID number for controlling the display via the
RS232C connection. Each display must have a unique
ID number when multiple sets of this display are
connected. Monitor ID number range is between 1
to 255.
The option are: {
Monitor group }
Monitor ID
Monitor ID
Monitor group
1
1
• {
Monitor group
}
The options are: {
Off
} / {
1-254
}
• {Off} – {Monitor group} are not
supported.
• {1-254} – {Monitor group} are supported.
The default setting is 1.
1 2
5 6
3 4
7 8
9 10 11 12
13 14 15 16
Heat status
This function allows you to check the thermal status
at any time.
Monitor information
Shows information about your display, including
model number, serial number, operating hours and
software version.
Monitor information
Model name
Serial NO.
Operation hours
SW Version
DS65MU01
N/A
0
FB01.06
HDMI Version
Set the HDMI version to 1.4 or 2.0, this setting is only
valid on HDMI input
Configuration2 reset
Reset all settings in Configuration2 menu to the
factory preset values.
6.2.6. Advanced option menu
Picture
Screen
Audio
Configuration 1
Configuration 2
Advanced option
IR control
Power LED Light
Keyboard control
Off Timer
Date and time
Schedule
HDMI with One Wire
Language
OSD Transparency
Power Save
Advanced option reset
Unlock
On
Unlock
Off
Action
Action
Off
English
Off
Mode 1
Action
IR control
Select the operation mode of the remote control
when multiple displays are connected via an RS232C
connection.
• { Unlock } - All displays can be operated normally
by the remote control unit.
• { Primary } - Designate this display as the primary
display for remote control operation. Only
this display can be operated by the remote
control. (In primary mode, IR key will always
be processed regardless the monitor id/group
settings).
• { Secondary } - Designate this display as the
secondary display. This display can not be
operated by the remote control, and will only
receive the control signal from the primary
display via the RS232C connection.
• {
Lock All
} / {
Lock all but Volume
} / {
Lock all but
Power } / {Lock all except PWR & VOL}- Lock
the remote control function of this display. To
unlock, press and hold the [
]
INFO
button
on the remote control for 6 (six) seconds.
Power LED light
Choose to set power indicate LED on or off.