-17-
Rear Case
[14]
Shift Arm
[16]
Steel Ball D5
[10]
Ring Gear
[11]
Planet Gear (C) Set
[12]
Washer (A)
[13]
Screw Set D3 x 12
[15]
Pinion (C)
[17]
Planet Gear (B) Set
[18]
Slide Ring Gear (B)
[19]
Pinion (B)
[20]
Planet Gear (A) Set
[21]
First Ring Gear
[22]
Washer (B)
[23]
Groove
Fig. 7
(c) With the ridge at the Click Spring
[5]
facing the front side, insert the Click Spring
[5]
into the recess of
the Front Case
[9]
. Then mount the Clutch Dial
[4]
to the Nut
[6]
by engaging the wider projection of the
Nut
[6]
with the wider recess of the Clutch Dial
[4]
. (The wider recess of the Clutch Dial
[4]
is positioned
at "5" when viewed from outside.) Be sure to fit the hook of the Front Case
[9]
into the hole in the Clutch
Dial
[4]
. (See Fig. 6.)
NOTE: Do not push the Clutch Dial [4] when assembling. Otherwise, the click spring may become
deformed and fail to work properly.
3. Reassembly of the gear unit
(a) Apply grease (Hitachi Motor Grease No. 29, Code No. 930035) to the meshing parts of the gear.
(b) Install the parts in series from the six Steel Ball D5
[10]
to Washer (B)
[23]
as shown in Fig. 7.
Fig. 6
