Hitachi DH 40MC, Руководство по обслуживанию, Страница: 6 / 17

-5-
Fig. 9 • Mounting the cylinder and retainer sleeve
[28]
[30]
[38]
[40]
[33]
[31]
[24]
[48]
[32]
[85]
[22]
[39]
[41]
[47]
[25] [26]
[34]
[37]
[42]
[44]
[43]
Be careful of the mounting direction.
Be careful of the mounting direction.
(3) Mounting the cylinder and retainer sleeve
• Mount the Retainer Damper Washer [26] , Damper Sleeve [25] , and Retainer Damper (B) [24] to the
Retainer Sleeve [28] in this order, while aligning the rounded surface of the Retainer Damper Washer
[26] with the rounded surface of the Retainer Sleeve [28] .
• Insert the Second Hammer [30] (equipped with O-ring (C) [29] ), Damper Washer [31] , Damper [32] ,
and Damper Holder [33] into the Retainer Sleeve [28] in this order, while aligning the rounded surface
of the Damper Washer [31] with the rounded surface of the Second Hammer [30] .
• Insert the assembly of the Retainer Sleeve [28] into the Cylinder Case [22] .
NOTE: Be careful not to curl the lip of the oil seal.
• After inserting the Thrust Washer [44] and the Bevel Gear [43] into the Crank Case Ass'y [91] , insert
the Slider [42] into the outer periphery of the Bevel Gear [43] along the Crank Case Ass'y [91] groove.
NOTE: The Bevel Gear [43] cannot be inserted if the Slip Clutch Ass'y [93] is mounted to the
Crank Case Ass'y [91] on ahead.
• Insert the Clutch [41] so that it engages with the internal claw of the Bevel Gear [43] .
• Insert the Striker [34] equipped with the O-ring [35] into the Cylinder [36] . Fit the Clutch Spring [40] to
the Cylinder [36] , and then insert the assembly of the Cylinder [36] into the Crank Case Ass'y [91] .
• Insert the Lock Sleeve [39] into the Crank Case Ass'y [91] , while aligning the inner spline groove of the
Crank Case Ass'y [91] with the Lock Sleeve [39] spline.
• Place the Lock Spring [38] and Spring Holder (B) [37] on the Lock Sleeve [39] .
• Fit the protrusion of the Retainer Sleeve [28] in the Cylinder [36] groove, and then mount the Cylinder
Case [22] equipped with the Retainer Sleeve [28] to the Crank Case Ass'y [91] equipped with the
Cylinder [36] .