Hitachi DH 28PC Скачать руководство пользователя страница 29

Страница: 29 / 40

-26-

(h) Oil Seal and O-Ring

Carefully handle all oil rings and seals (Cylinder Case

[8]

Oil Seal

[10]

, O-Ring (1AS-50)

[9]

, Oil Seal (B)

[84]

and O-Ring (S-32)

[109]

of Crank Case

[104]

, Second Hammer

[23]

O-Ring (C)

[22]

, O-Rings (I.D

19.2)

[31]

of Piston

[36]

and Striker

[30]

, O-Ring (A)

[27]

, lever shaft O-Ring

[62]

, Rubber Seal

[102]

)) so

as not to damage any of these parts.

2. Application of lubricant

• Filling Hitachi Motor Grease No. 29

Apply 15 g of grease to Crank Case

[104]

and Gear Cover

[97]

for lubricating the gears.

• Application of Hitachi Motor Grease No. 29
Apply grease to Armature

[68]

pinion, Steel Ball D7.0

[20]

, and O-Ring

[62]

• Filling special grease (for the hammer and hammer drill)

Apply 25 g of grease to the Connecting Rod

[37]

side of Crank Case

[104]

, and 5 g of grease to the

Cylinder

[21]

side.

• Application of special grease (for the hammer and hammer drill)

Apply special grease to the inner diameter lip portions of Oil Seal (B)

[84]

and Oil Seal

[10]

, the inner

diameter portion of Connecting Rod

[37]

, the outer diameter portions of Piston

[36]

, O-Ring

[62]

, Damper

(A)

[11]

, O-Ring (C)

[22]

, Damper (B)

[25]

, O-Ring (A)

[27]

, O-Ring

[62]

, the outer diameter portion of

Lock Sleeve

[17]

, the slide portions of Second Hammer

[23]

and Striker

[30]

, the inner diameter portions

of Slide Sleeve

[19]

and Clutch

[33]

, and both the inner and outer diameter portions of Bevel Gear

[34]

3. Tightening torque

Apply screw locking agent TB1401 to all hex. socket head bolts M4, M5 and M6.

NOTE:
Be sure to apply screw locking agent (Three Bond TB1401) to the threads during reassembly.
Otherwise, any bolts becoming loose due to vibration may damage the tool body.

• Seal Lock Hex. Socket Hd. Bolt M6 x 20

[7]

(For mounting the cylinder case) ------------------------- 9.80 N•m (100 kgf•cm)

• Seal Lock Hex. Socket Hd. Bolt M5 x 40

[103]

(For mounting the crank case) ---------------------------- 7.84 N•m (80 kgf•cm)
• Hex. Socket Hd. Bolt (W/Flange) M5 x 16

[98]

(For mounting the crank cover) --------------------------- 7.84 N•m (80 kgf•cm)
• Hex. Socket Hd. Bolt (W/Flange) M5 x 16

[98]

(For mounting the handle) ---------------------------------- 3.92 ± 0.49 N•m (40 ± 5 kgf•cm)

• Hex. Socket Hd. Bolt (W/Flange) M4 x 10

[43]

(For mounting the handle) ---------------------------------- 1.96 ± 0.49 N•m (20 ± 5 kgf•cm)
• Seal Lock Hex. Socket Hd. Bolt M4 x 12

[57]

(For mounting the change lever) -------------------------- 1.47 ± 0.49 N•m (15 ± 5 kgf•cm)

• Hex. Hd. Tapping Screw D5 x 40

[72]

-------------------- 2.94 ± 0.49 N•m (30 ± 5 kgf•cm)

• Tapping Screw (W/Flange) D5 x 20

[78]

----------------- 2.94± 0.49 N•m (30 ± 5 kgf•cm)

• Tapping Screw (W/Flange) D4

[44] [47] [82]

------------ 1.96± 0.49 N•m (20 ± 5 kgf•cm)

1.96

Содержание DH 28PC









































Результаты поиска

Содержание DH 28PC

Отзывы:

Бренды по названию

Популярные бренды

Hitachi DH 28PC, Технические данные и руководство по обслуживанию

Результаты поиска

Содержание DH 28PC

Отзывы:

Бренды по названию

Популярные бренды