manualshive.com logo in svg

Hitachi Deskstar 7K250, Технические характеристики

Жесткий диск Hitachi Deskstar 7K250 - это надежное устройство для хранения данных. Для быстрой установки обязательно загрузите бесплатное руководство по эксплуатации с manualshive.com. Наше руководство скачивается моментально, чтобы вы могли начать использовать ваш продукт быстрее и легче.

Поделиться
Скачать
background image

Deskstar 7K250 Hard Disk Drive Specification

80

10.7  S.M.A.R.T. Function

The intent of Self-monitoring, analysis, and reporting technology (S.M.A.R.T.) is to protect user data and prevent 
unscheduled system downtime that may be caused by predictable degradation and/or fault of the device. By 
monitoring and storing critical performance and calibration parameters, S.M.A.R.T. devices employ sophisticated 
data analysis algorithms to predict the likelihood of near-term degradation or fault condition. By alerting the host 
system of a negative reliability status condition, the host system can warn the user of the impending risk of a data 
loss and advise the user of appropriate action.

10.7.1  Attributes

Attributes are the specific performance or calibration parameters that are used in analyzing the status of the device. 
Attributes are selected by the device manufacturer based on that attribute's ability to contribute to the prediction of 
degrading or faulty conditions for that particular device. The specific set of attributes being used and the identity of 
these attributes is vendor specific and proprietary.

10.7.2  Attribute values

Attribute values are used to represent the relative reliability of individual performance or calibration attributes.  The 
valid range of attribute values is from 1 to 253 decimal. Higher attribute values indicate that the analysis algorithms 
being used by the device are predicting a lower probability of a degrading or faulty condition existing. Accordingly, 
lower attribute values indicate that the analysis algorithms being used by the device are predicting a higher 
probability of a degrading or faulty condition.

10.7.3  Attribute thresholds

Each attribute value has a corresponding attribute threshold limit which is used for direct comparison to the attribute 
value to indicate the existence of a degrading or faulty condition. The numerical value of the attribute thresholds are 
determined by the device manufacturer through design and reliability testing and analysis. Each attribute threshold 
represents the lowest limit to which its corresponding attribute value can be equal while still retaining a positive 
reliability status. Attribute thresholds are set at the device manufacturer's factory and cannot be changed in the field. 
The valid range for attribute thresholds is from 1 through 253 decimal.

10.7.4  Threshold exceeded condition

If one or more attribute values, whose Pre-failure bit of their status flag is set, are less than or equal to their 
corresponding attribute thresholds, the device reliability status is negative, indicating an impending degrading or 
faulty condition.

10.7.5  S.M.A.R.T. commands

The S.M.A.R.T. commands provide access to attribute values, attribute thresholds, and other logging and reporting 
information.

10.7.6  Off-line read scanning

The device provides the off-line read scanning feature with reallocation. This is the extension of the off- line data 
collection capability. The device performs the entire read scan with reallocation of the marginal sectors to prevent 
loss of user data.

If interrupted by the host during the read scanning, the device services the host command.

Содержание Deskstar 7K250


















































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для Deskstar 7K250

OWC On-The-Go USB Owner'S Manual preview
On-The-Go USB
Бренд: OWC Страницы: 2
FAST LTA Silent Cubes Quick Start Manual preview
Silent Cubes
Бренд: FAST LTA Страницы: 8
Morrow Discus M10 User Manual preview
Discus M10
Бренд: Morrow Страницы: 46
IBM Deskstar 34GXP Quick Installation Manual preview
Deskstar 34GXP
Бренд: IBM Страницы: 2
garofalo BAULE 150 User Manual preview
BAULE 150
Бренд: garofalo Страницы: 12
Harmonic MediaStore 7200 Quick Reference Manual preview
MediaStore 7200
Бренд: Harmonic Страницы: 2
STONEFLY USO-HA D500 Series Setup Manual preview
USO-HA D500 Series
Бренд: STONEFLY Страницы: 58
Brookstone 437590 User Giude preview
437590
Бренд: Brookstone Страницы: 8
Geekworm NASPi-Gemini User Manual preview
NASPi-Gemini
Бренд: Geekworm Страницы: 13
DuraMax Insulated Cabin Owner'S Manual/ Instructions For Assembly preview
Insulated Cabin
Бренд: DuraMax Страницы: 38
Western Digital WD VelociRaptor WD1500HLFS Specification Sheet preview
WD VelociRaptor WD1500HLFS
Бренд: Western Digital Страницы: 2
Sony QDH16 Operating Instructions preview
QDH16
Бренд: Sony Страницы: 2
Sony SAITe1300-F Operating Instructions Manual preview
SAITe1300-F
Бренд: Sony Страницы: 50
Sony ODS-L10 Operation Manual preview
ODS-L10
Бренд: Sony Страницы: 124
Sony RMO-S561 User Manual preview
RMO-S561
Бренд: Sony Страницы: 136
Sun Microsystems Blade 6000 Installation Manual preview
Blade 6000
Бренд: Sun Microsystems Страницы: 36
Qsan XCubeNAS Series White Paper preview
XCubeNAS Series
Бренд: Qsan Страницы: 29
QNAP TS-h1090FU Quick Installation Manual preview
TS-h1090FU
Бренд: QNAP Страницы: 12

Бренды по названию

Популярные бренды

Загрузить еще бренды