Hitachi D 10VF, Технические данные и руководство по обслуживанию

Страница: 67 / 104

--- 14 ---
Fig. 3
Spindle
Tighten
Loosen
Fig. 4
Handle
joint
Tighten
Loosen
Tighten
Loosen
Side
handle
(3) Electric brake (D13VF and D13VG)
When releasing the trigger of the switch, the electric brake will be applied for immediate stopping (within 3
seconds).
CAUTION
As there is some reaction when the brake functions, be sure to hold the drill securely.
When the brake becomes ineffective (if it takes more than 3 seconds from releasing the trigger of the switch
to stopping), check the carbon brushes. If the length of the carbon brushes is 5 mm or less, replace them
with new ones. If the trouble still persists, replace the armature ass'y.
(2) Side handle
For D 10VG and D 13VF
A side handle is supplied with drill.
It can be installed on either side of the tool for right or
left handed use.
To install the side handle, thread it into the socket on
the desired side of the tool and tighten it securely.
(Fig. 3)
For D 13VG
A side handle and a handle joint are supplied with drill.
The large torque of the motor for this drill can result in
considerable reaction to your arms during drilling work.
Accordingly, make absolutely sure before use that the
side handle and the handle joint are completely
installed. (Fig. 4)