-7-
CARE OF AIR FILTERS
＊
MOTOR PROTECTION AIR FILTER(Fig. 22)
Once or twice a year, or when it becomes visibly
soiled, the motor protection air filter may need
cleaning.
1. Remove the filter from the bottom of the bag
compartment as shown in Fig. 23 and wash in
warm water.
2. After washing the filter, dry thoroughly away from
direct sun-light and fit it back into the cleaner.
NOTE: If the air filter is used when wet, suction is
impaired and the motor may be damaged.
＊
AIR FILTER (for CV-80D)
HYGIENIC AIR FILTER (for CV-80DC)(Fig.
24,25)
Your vacuum cleaner has a highly efficient
electrostatic exhaust air filter to trap even the finest
dust particles in the exhaust air.
Once or twice a year, when the filter gets dirty,
change the filter as follows.
1. Open the front cover .
2. Remove the old filter from the cleaner.
3. Fit a new filter in th cleaner.
Hygienic air filters may be purchased from your local
dealer.
In the event that replacement filters are not available
at your local shops, for where to buy please contact
01628 643000.
＊
HEPA CLEAN FILTER (for CV-80DP)(Fig.
24,26)
Your vacuum cleaner has a highly efficient
electrostatic exhaust air filter to trap even the finest
dust particles in the exhaust air.
Once or twice a year, when the filter gets dirty,
change the filter as follows.
1. Open the front cover .
2. Remove the old filter from the cleaner .
3. Fit a new filter in the cleaner.
HEPA CLEAN filters may be purchased from your
local dealer.
In the event that replacement filters are not available
at your local shops, for where to buy please contact
01628 643000.
Fig. 23
Fig. 24
Fig. 25
Fig. 26
27
28
29
30
27
29
28
30
28