Hitachi CV80D, Руководство пользователя, Страница: 3 / 12

-2-
ON-OFF SWITCH
Turn cleaner on or off by pushing downward on the power
switch .
VARIABLE POWER CONTROL (except CV-80D,
Fig.4)
The HITACHI vacuum cleaner CV-80DP/DC has an
electronic power control. The suction power and the rotary
brush speed can be regulated to suit the floor covering by
sliding the control knob
. If a stronger suction is required
for thick carpets and hard floors etc., simply slide the knob
to the right side marked . Likewise, the suction can
be reduced for fabrics and curtains etc., adjusting the
knob to the left side marked . mark is for the
economical middle power position.
CORD STORAGE AND RELEASE
1. To store the cord, turn the upper cord storage hook
to the upward position, and wrap the cord around the
hooks.
2. To release the power cord, turn the upper cord storage
hook down ward, then pull off the complete cord.
3. To help secure the cord during use, fix it on the upper
cord storage hook .
HANDLE POSITION
To change the position of the handle, first press with foot
on the handle release pedal at the rear of the cleaner, and
then lower the handle.
(A) Upright position: When the handle is in this
position the rotary brush is automatically raised
away from the floor.
(B) Normal working position: This position allows you
to raise the front of the nozzle head to clear steps.
(C) Low position: For reaching under low furniture.
NOTE: The handle should always be in upright
position when cleaning tools are used.
Fig. 3
Fig. 4
Fig. 5
Fig. 6
3
4
5
6
3
4
4
5
5
6