English
35
6. Sliding the switch towards
Ϩ
will switch on, simultaneously
activating the LED light which
will light the application tool.
(
Fig. 5
)
To turn the main unit o
ff
, slide
the switch towards .
CAUTION
Do not look directly into the
light from the LED lamp.
Continuous and direct
exposure to the light from
the LED lamp can injure your eyes.
7. Adjusting operating speed (
Fig. 6
)
The tool is equipped with two modes:
“Standard mode” and “AUTO Mode”.
(1) Standard Mode
You can change the vibration frequency
between 6000 to 20000 /min by adjusting the
dial from “1” to “5”.
(2) AUTO Mode
Depending on the workload, AUTO Mode
“A” will automatically change the vibration
frequency to 15000 /min or 20000 /min.
This has the e
ff
ect of lowering vibration and noise prior to and during
operation.
Adjust the dial for the mode and speed that best suits your task conditions
and materials.
Table 4 Operating speed
Model
Dial
Vibration Frequency
Standard mode
1
–
5
6000
–
20000 /min
AUTO Mode
A
No load: 15000 /min
With load: 20000 /min
With AUTO Mode, the vibration frequency may not reach 20000 /min or
return to 15000 /min depending on variables such as the type of work or the
attachment in use.
LED light
Switch
Fig. 5
Dial
Fig. 6
000Book̲CV14DBL̲ChS.indb 35
000Book̲CV14DBL̲ChS.indb 35
2017/04/17 16:38:12
2017/04/17 16:38:12
