-2-
Fig. 4 • Removal of the battery terminal
[14]
[7]
[10]
[5]
[4]
[1]
Fig. 3 • For Europe and UK
[8]
3. Disassembly of the power supply unit
(1) To disconnect the red and black internal wires of the motor in the Gear Box
[1]
from the DC-Speed
Control Switch
[10]
, use a soldering iron to unsolder them.
NOTE: Do not disassemble the DC-Speed Control Switch [10].
(2) Remove the Battery Terminal
[12]
from the DC-Speed Control Switch
[10]
. Pull the internal wire toward
“A” as shown in the figure below while pressing the claw of the faston terminal to remove the faston
terminal.
A
Faston terminal
Claw
[12]
Housing (A)
Housing (B)
[9]
Motor
Та
ше
в
-
Га
лв
ин
г
ОО
Д
www.tashev-galving.com
