GB
- 45 -
Sleep Timer Last Minute Indicator
It is displayed on the upper right of the screen. If sleep timer
is activated it is displayed with the TV status and erased with
it after 3 seconds.
If there is
only one minute of the countdown left
of the timer, it
is displayed automatically on the upper left of the screen, and
stayed there until finishing. Then TV goes automatically to
stand-by.
Mute Indicator
It is placed in the upper middle of the screen when enabled,
and it stays there until it is disabled.
To cancel mute, there
are
two alternative; the first one is press-
ing to " " button, thus volume is set to the preceding value,
and the second one is increasing the volume level, thus it
starts at the minimum level to increase. By decreasing the
volume level in mute state, mute will not be ignored, only the
volume level will decrease. If mute
is cancelled
after decreas-
ing the volume level, the volume will
return at
the decreased
level.
No-Signal
No-Signal Timer Indicator
It is displayed in the middle of the screen when no valid sig-
nal detected. It shows the
time remaining before
the switch-
ing to the Stand-By mode (it takes 5 minutes when
no
signal
detected or no any Remote Control command is accessed).
The indicator is displayed
for
3 seconds when there is no valid
signal.
After an Remote Control command (if No-Signal Timer is
active) the timer stops and if no signal detected again the timer
is initialized to 5 minutes and starts 3 seconds later again to
count down.
It is not valid in AV mode.
Blue Background During No-Signal
In case, no valid signal is detected (
in TV
or AV mode) Blue
Background is activated.During search process Blue Back-
ground is not active.
But instead there is another feature given;
the semi-transparent menu background is made blue.
Volume Bar
It is displayed in the lower middle of the screen. When a vol-
ume command is received (pressing
Vol+
or
Vol-
by Re-
mote Control or Front panel) and no menu is active, it stays on
the screen for 3 seconds, after the last volume command or
until another command is received in between.
AV Modes
By pressing the
$9
button you can switch your TV to AV
modes (except being in Teletext). Pressing this button
consecutively will switch the TV in one off the AV modes: AV-1,
F-AV, RGB.
AV1 supports the RGB mode. But if there is some colour prob-
lem in AV1 mode, please force the AV mode to RGB mode.
In order to quit the AV mode press the
79
button.
Teletext
Teletext is an information system that displays text on your TV
screen. Using the Teletext information system you can view a
page of information on a subject that is available in the list of
contents (index).
On screen display is not available in text mode.
Contrast, brightness or colour control is not available, but
volume control is available in text mode.
To operate Teletext
Select a TV station on which Teletext is being transmitted.
Press (TELETEXT)
button. Usually the list of contents
(index) is displayed on the screen.
To select a page of Teletext
Press the appropriate digit buttons for the required Teletext
page number.
The selected page number is displayed at the top left corner
of the screen. The Teletext page counter searches until the
selected page number is located, so that the desired page is
displayed on the screen.
Press button to move the Teletext screen forward one
page at a time.
Press button to move the Teletext screen backward one
page at a time.
To Select Index Page
To select the page number of the index (generally page 100),
press
button.
To Select Teletext with a TV Programme
Press
button. The text is now superimposed over the
programme on the screen.
Press
button again to return to the Teletext page.
Searching for a page while watching TV
While Teletext Mode is on, pressing
will change the
mode to TV, one more press to
will change the mode
from TV to the latest Teletext page we left. In the TV mode enter
a page number using digit keys. As you enter digits first line
of teletext page will appear on top screen and will remain
there until the requested page is found. Then teletext line will
be replaced by page number to indicate that page has been
found. Now you can display this teletext page pressing
button.
03-ENG-(CP2143S)-2172H-AV-3040-AK30-ST1P-VST-BG.p65
24.01.2003, 11:43
45
