ENGLISH-7
ENGLISH
IIN
NS
ST
TA
AL
LL
LA
AT
TIIO
ON
N ((cco
on
nttiin
nu
ueed
d))
Cabling
RGB signal input:
Connect the RGB IN terminal of the projector to the RGB signal output of the computer by the
enclosed RGB cable. For some modes, the optional Mac adapter is necessary.
Consult your dealer to
connect with the Apple computer.
Some computers may have multiple display screen modes. Use of some of these modes will not be
possible with this projector.
Audio signal input :
Connect the AUDIO IN terminal of the projector to the audio signal output by the enclosed audio
cable.
Video signal input:
Connect the VIDEO terminal of the projector to the video signal output of the video tape recorder
by the enclosed video/audio cable except for S-Video signal.
For S-Video signal, use the S-VIDEO terminal of the projector and the optional S-Video cable with
Mini DIN 4-pin jack.
RS-232C communication:
Connect the CONTROL terminal of the projector to the computer by the optional RS-232C cable.
Refer to the manual of the RS-232C cable section for the pin assign of connectors and RS-232C
communication data.
CAUTION
• Incorrect connecting could result in fire or
electrical shock. Please read this manual and the
separate “SAFETY INSTRUCTIONS”.
• Before connecting, turn off to all devices to be
connected, except for the USB cable.
• The cables (Power cord, RGB cable and other
cables) may have to be used with the core set to
the projector side. Use the cables which are
included with the projector or specified.
Core
NOTE:
• Before connecting, read the instruction manuals of the devices to be connected, and make sure that
the projector is compatible with the device.
• Secure the screws on the D-sub connectors and tighten. Use the D-sub connector cable with inch
thread screws.
