10
2. Equipment connection and network setting
4) Click
[One-Click]
button in Fig. 2.2.a, then projector will be found. And the
capture start button is activated, then real time display will be started
automatically.
2.2 Network connection using “One-Click-Communication” function
(Continued)
[Wireless LAN connection]
1) When projector network settings such as IP address and subnet mask are
changed, need to return to the projector factory default settings. (
8
)
2) In case IEEE802.11b/g wireless LAN device is built-in the PC, make the LAN
valid and other network connections invalid. If wireless LAN device is not built
in the PC, connect IEEE802.11b/g wireless LAN device and install device driver
to the PC. (Refer to the user guide for wireless LAN device details.)
3) Start up “MIU Live Viewer”, then the window appears (Fig. 2.2.a).
4) Click
[One-Click]
button in Fig. 2.2.a, then projector will be found. And the
capture start button is activated, then real time display will be started
automatically.
When you need to set the original IP address and SSID other than factory default
settings, need to set up network connection manually.
This section explains how to set up network connection manually.
2.3 Manual network connection setting – Wired LAN -
At first, connect projector and PC with wired LAN connection to check PC setting
and connection status. Next section explains PC settings.
Connecting projector with network using LAN cable, and then set it ready to
communicate with PC.
* Connecting with existing network, contact network administrator.
At last, turn on the projector. This is the end of Equipments connection.
2.3.1. Equipments connection
