Hitachi CP-X1200 Series страница 55 Скачать руководство пользователя

Страница: 55 / 78

Other Care

WARNING

• Please carefully read the “User’s Manual - Safety Guide”.

• Before caring, make sure the power switch is off and the power cable is not

plugged in.
• Be cautious of high temperature. Do not touch about the lens and ventilation

openings during use or immediately after use prevent a burn.

• Never try to care for the inside of the unit yourself. Doing so is dangerous.

CAUTION

• Incorrect care could have adverse influence such as discoloration,

peeling paint, etc.

• Do not use cleaner or chemicals other than those listed below, including benzene and

paint thinner.

• Do not use aerosols or sprays.
• Do not polish or wipe with hard objects.

Caring For The Inside Of The Projector

In order to ensure the safe use of your projector, please have it cleaned and inspected by
your local dealer about once every 2 years.

Turn off the projector, and unplug the power cord.

Lightly wipe the lens with a commercially available lens-cleaning wipe. Do not touch
the lens directly with your hand.

Caring For The Lens

Turn off the projector, and unplug the power cord.

Wipe lightly with gauze or a soft cloth.

memo

If soiling is severe, dip soft cloth in water or a neutral cleaner dilute in water,

and wipe lightly after wringing well. Then, wipe lightly with a soft, dry cloth.

Caring For The Cabinet And Remote Control

01CP-X1200-ENG-OG-三校 03.12.5 1:10 PM ページ40

Содержание CP-X1200 Series















































































Результаты поиска

Содержание CP-X1200 Series

Отзывы:

Похожие инструкции для CP-X1200 Series

Бренды по названию

Популярные бренды

Hitachi CP-X1200 Series, Руководство пользователя

Результаты поиска

Содержание CP-X1200 Series

Отзывы:

Похожие инструкции для CP-X1200 Series

Бренды по названию

Популярные бренды