manualshive.com logo in svg

Hitachi CP-WUX645N, Руководство по эксплуатации

Поделиться
Скачать
Hitachi CP-WUX645N Скачать руководство пользователя страница 168

11

ENGLISH

WARNING

►

Before taking care of the air 

lter, make sure the power cable is not plugged in, then 

allow the projector to cool suf

ciently.

►

Use only the air 

lter of the speci

ed type. Do not use the projector without the air 

lter or the 

lter cover. It could result in a 

re or malfunction to the projector.

►

Clean the air 

lter periodically. If the air 

lter becomes clogged by dust or the like, 

internal temperatures rise and could cause a 

re, a burn or malfunction to the projector.

(1) Press the 

MENU

 button to display a menu.

(2)

  Point at the “

FILTER TIME

” using the 

▼

/

▲

 button, then press the 

►

 button. A dialog will appear.

(3)

Press the 

▲

 button to select 

RESET

 on the dialog. It performs resetting the 

lter time.

NOTE

 • Please reset the 

lter time only when you have cleaned or replaced the air 

lter, for a 

suitable indication about the air 

lter.

• The projector may display the message such as “

CHECK THE AIR FLOW

” or turn off the 

projector, to prevent the internal heat level rising. 

Filter cover

Filter cover knobs

Filter unit

 Filter cover

Filter frame

Filter (

ner meshed)

Filter (larger meshed)

Please check and clean the air 

lter periodically. When the indicators or a message prompts you to 

clean the air 

lter, comply with it as soon as possible. The air 

lter has two kinds of 

lters inside. 

Replace the 

lters when they are damaged or too soiled. To prepare the new 

lters, make contact 

with your dealer and tell the following type number.

Type number = 

MU05661

1.

Turn the projector off, and unplug the power cord. Allow the projector 

to suf

ciently cool down.

2.

Use a vacuum cleaner on and around the 

lter cover.

3.

Pull the 

lter cover knobs while lifting it, to take the 

lter unit off.

4.

Use a vacuum cleaner for the 

lter vent of the projector and both sides 

of the 

lter unit.

5.

Pull the 

lter frame’s knob up while holding the 

lter cover to remove 

the 

lter frame, then take the 

lters out.

6.

Set new 

lters where former 

lters were. Put the larger meshed 

lter 

into a 

lter cover 

rst. Then put the 

ner meshed 

lter on the larger 

meshed one.

7.

Put the 

lter frame back where it was.

8.

Put the 

lter unit back into the projector.

9.

Turn the projector on and reset the 

lter time using the 

FILTER TIME

item in the 

EASY MENU

.

When you replace the lamp, please replace the air 

lter. An air 

lter of 

speci

ed type will come together with a replacement lamp for this projector.

I

f the 

lters are damaged or too soiled, replace them according to the following 

procedure number 5 to 7. Otherwise, please jump to the procedure number 8.

Air filter

Содержание CP-WUX645N

















































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды